Mechanical window
- Active area versus bezel opening
- Outer dimensions, thickness and mounting points
- Connector or FPC position and cable exit
- Portrait orientation and scan direction
Square LCD Displays for Instruments, Avionics & Smart Controls
Square TFT LCD modules for instruments, avionics, flight simulators and smart controls. Compare 1.3–10.3 inch 1:1 displays, 128×128 to 800×800 resolutions, SPI, MCU, MIPI, RGB, LVDS or HDMI controller options, brightness and touch.
Showing all 16 results
Square TFT LCD Module Selection
A square LCD is selected by native pixel matrix, active area, outer dimensions and system interface—not by diagonal size alone. Confirm the visible window, resolution, controller path, brightness, touch stack, connector position and expected quantity before choosing a module.
Square Display Size and Resolution Ranges
| Size group | Typical native resolution | Interface / controller | Typical use |
|---|---|---|---|
| 1.3–1.44 inch | 128×128 or 240×240 | SPI or MCU, model dependent | Smart knobs, meters and handheld controls |
| 3.9–5.1 inch | 480×480 | MCU, SPI, MIPI DSI or RGB/TTL | Control dials, compact HMI and instrumentation |
| 6.2–7.5 inch | 720×720, 768×768 or 800×800 | LVDS, RGB or external HDMI controller | Avionics, flight simulators and industrial instruments |
| 8.8–10.3 inch | Often 768×768 | LVDS or controller-board solution | Cockpit panels and larger instrument displays |
The listed ranges are category guidance. Exact outline, active area, pin definition, brightness, touch option and availability must be verified against the selected model datasheet.
Compatibility Checklist
Interface and timing
- SPI, MCU, RGB, MIPI DSI or LVDS
- Supply voltage, pinout and lane/channel mapping
- Native timing and host graphics support
- HDMI/DisplayPort controller requirement
Optics and touch
- Brightness for the real ambient-light level
- Viewing angle and polarizer orientation
- PCAP or resistive touch integration
- Cover glass, printed border and optical bonding
Supply and validation
- Operating temperature and service hours
- Prototype and annual production quantities
- Lifecycle and replacement expectations
- Sample validation in the final enclosure
Controller and Content Considerations
Small square TFT modules often connect directly to an embedded processor through SPI, MCU, RGB or MIPI. Larger 720×720 and 768×768 modules commonly use LVDS and may require an HDMI or DisplayPort controller. The controller must support the panel’s native timing; outputting a conventional 16:9 resolution does not guarantee correct square scaling.
Design the user interface at the native square resolution whenever possible. For circular gauges, avionics instruments and simulators, verify the visible window and bezel mask without assuming the LCD active area is round. If a square module is placed behind a circular cover opening, pixels outside that opening remain part of the panel.
Related resources: flight simulator displays, high brightness LCD modules, and LCD customization capabilities.
Frequently Asked Questions
Is a 480×480 LCD always the same physical size?
No. Resolution does not determine outer dimensions or active area. Compare the mechanical drawing, connector position and mounting features for every model.
Can HDMI connect directly to a square LCD?
Most raw TFT modules do not accept HDMI directly. A compatible controller board must convert HDMI to the panel interface and native timing.
Can a square LCD be used behind a round instrument opening?
Yes, if the active area covers the opening and the bezel masks unused pixels. Confirm the visible diameter, pixel layout and mechanical tolerances.
Are all square displays sunlight readable or wide temperature?
No. Brightness and temperature limits are model-specific. Optical performance also depends on cover glass, touch layers, bonding and the enclosure.
What should be included in a square LCD RFQ?
Provide diagonal size or active area, outline drawing, native resolution, interface, brightness, touch and cover-lens needs, temperature range, controller requirement, sample quantity and annual quantity.
Review Your Square LCD Requirement
Send the window drawing, native resolution, host interface, optical requirements and quantity. We will assess suitable modules and any controller or customization gaps before quotation.
