Mechanical geometry
- Visible diameter and active pixel area
- Outer diameter, thickness and mounting
- True circular outline versus masked square panel
- FPC position, bend radius and cable exit
Round TFT LCD Display
High-resolution Round LCD Display modules for smart knobs and automotive instruments. Available in sizes 1.28″ to 5.0″ with MIPI interface.
Showing all 18 results
Round TFT LCD Display Selection
Round TFT displays are selected by visible diameter, native pixel matrix, module outline and interface. Confirm whether the panel is physically circular or a square active matrix behind a round mask, then review touch, cover glass, connector position, brightness and quantity.
Typical Round Display Formats
| Size range | Typical resolution | Interface | Typical application |
|---|---|---|---|
| 0.96–1.54 inch | 160×80, 240×240 or model-specific | SPI or MCU | Wearables, compact dials and status indicators |
| 1.85–2.8 inch | 360×360, 480×480 | SPI, RGB or MIPI DSI | Smart knobs, meters and control panels |
| 3.4–4.0 inch | 480×480, 720×720 | RGB, MIPI or LVDS | Appliance controls, instrumentation and HMI |
| Large-format round | Model-specific | LVDS/eDP or controller solution | Digital signage, simulator instruments and custom enclosures |
These ranges are selection guidance only. Verify the exact active diameter, outer glass diameter, resolution, interface and operating limits from the model datasheet.
Integration Checklist
Interface and graphics
- SPI, MCU, RGB, MIPI, LVDS or eDP
- Voltage, pinout and initialization sequence
- Native resolution and circular UI rendering
- Controller-board requirement for HDMI input
Touch and cover lens
- PCAP touch diameter and controller
- Custom round cover glass and printed border
- OCA/OCR bonding or air gap
- Glove, water and EMI conditions
Environment and supply
- Brightness and ambient-light condition
- Operating temperature and service hours
- Prototype and annual quantities
- Lifecycle and sample validation plan
Round UI and Controller Considerations
Design the interface at the native resolution and keep critical text and controls inside the safe circular area. A square image can be clipped by the bezel, and rotation or scaling depends on the host processor or controller. Raw TFT modules normally do not accept HDMI directly.
Custom cover glass, touch sensor, printing, bonding, FPC or controller work may adapt an existing display. A new active diameter or pixel matrix is a different custom-display program with separate tooling, volume and schedule requirements.
Related resources: square LCD modules, flight simulator displays, and LCD customization capabilities.
Frequently Asked Questions
Are all round TFT displays truly circular?
No. Some use circular cover glass or a round bezel over a non-circular active matrix. Confirm both the pixel area and module outline.
Can HDMI connect directly to a round display?
Usually not. Small modules use SPI, RGB or MIPI, while larger raw panels may use LVDS or eDP. HDMI requires a compatible controller.
Can a round PCAP touch sensor be added?
Often yes, subject to sensor diameter, cover-glass design, controller tuning, bonding, quantity and environmental requirements.
How should artwork be designed for a circular screen?
Use the native resolution, define a safe circular content area and test rotation, clipping and touch targets in the final bezel.
What is needed for quotation?
Provide visible diameter, outer dimensions, resolution, interface, brightness, touch and cover-lens needs, temperature range, sample quantity and annual quantity.
Review Your Round TFT Requirement
Send the visible diameter, mechanical drawing, interface, optical requirements and quantity. We will assess suitable modules and any touch, controller or customization gaps before quotation.
