17.3 Inch 1920×768 High Brightness LVDS IPS Flight Simulator LCD Module with Driver Board

17.3 Inch 1920×768 High-Brightness LVDS Flight Simulator LCD Module

This wide-format Flight Simulator TFT LCD is listed for flight simulator applications and combines a 1920 × 768 resolution with 600 cd/m² brightness, IPS display mode and a 30-pin LVDS interface. The supplier description lists a 409 × 164 mm active area, 435 × 190 × 19 mm outline dimension, all-angle viewing and a 0°C to +50°C operating range. The listing includes a driver-board configuration.

Confirmed Product Specifications

Wide-Format Simulator Integration

The 1920 × 768 aspect ratio suits panoramic instrument layouts, multi-panel simulator dashboards and wide status or navigation interfaces. Mechanical approval should use the supplier drawing because the visible page does not specify mounting holes, bezel aperture, connector location or FPC direction.

Brightness and Optical Qualification

The listed 600 cd/m² brightness places this module in a high-brightness category for indoor and controlled bright environments. It does not by itself prove sunlight readability. Final qualification should include the cover lens, reflections, viewing direction, optical bonding, dimming and enclosure temperature.

LVDS and Driver-Board Scope

The source identifies a 30-pin LVDS panel and says the product is supplied with a driver board, but it does not identify the board input ports, supply voltage, timing support, cable set, firmware or power consumption. Confirm the complete board kit against the target host before sample approval.

Model and Dimension Review

The direct model number shown on the page is DBC173BEN30L060A. Per the requested product identity, this record uses 17.3 inch. The key attributes and parameter table on the source page state 17.2 inch, so the approved drawing and sample label should lock the final mechanical size and model revision.

Supply and Customization Review

The listing shows a minimum order quantity of one set. General terms state that stocked samples may ship within two days and mass production may require three to six weeks, while the FAQ separately says stocked products can ship within three working days. Confirm current stock, lead time, warranty, packaging and any driver-board revision in the quotation.

RFQ Checklist

• Exact approved size notation, model revision, drawing and sample-label photo.
• Host LVDS timing, connector pinout, cable, power sequence and driver-board input.
• Brightness environment, cover lens, optical bonding, dimming and thermal path.
• Outline, mounting points, bezel opening, FPC exit and installation orientation.
• Power consumption, firmware, inspection criteria, warranty and packaging.
• Sample quantity, annual forecast, lead time and approved-substitute policy.

Engineering FAQ

What size should be used for this product?

Use 17.3 inch as the target product identity, per the current instruction. The supplier parameter text says 17.2 inch and should be reconciled against the drawing and sample label before purchase.

Is sunlight readability guaranteed?

No. The source lists 600 cd/m² brightness; sunlight readability depends on the finished optical and thermal stack.

Is touch included?

No touch panel is specified on the product page. Treat touch or cover-lens integration as a separate requirement.