Innolux G154I1-LE1 LCD Panel for Industrial WXGA Displays

Innolux G154I1-LE1 15.4 Inch 1280×800 1ch-LVDS Industrial Panel

Innolux G154I1-LE1 15.4 Inch 1280×800 1ch-LVDS Industrial Panel is prepared for B2B industrial display replacement and OEM integration. 15.4 inch WXGA wide-temperature replacement for industrial displays. Use the current public page as a selection input, then confirm exact revision, drawing, interface, cable, optical stack, supply scope and sample approval criteria before production order.

Confirmed Product Specifications

Application Fit

This panel is useful when the equipment needs 1280×800 WXGA rather than FHD. It can preserve existing software and enclosure geometry in older industrial monitors and transport systems.

Interface and Controller Review

The page lists 30-pin 1ch-LVDS. Confirm exact connector, timing, voltage, cable length and host controller before sample order. If the controller expects 2-channel LVDS or eDP, direct replacement should not be assumed.

Optical and Environmental Boundary

The public table lists 450 nits, 700:1 contrast, 80/80/70/70 viewing and built-in LED converter. These details should be validated with the actual cover lens and operating temperature range.

Mechanical Replacement Checks

Compare active area, outline, depth, connector side, FPC or cable direction, mounting pressure and bezel opening with the original equipment. Same-size panels can still differ in mechanical fit. Replacement buyers should provide label photos, rear photos and controller details.

Touch and Front Stack

Unless touch is explicitly confirmed, treat the panel as a bare LCD. If touch, cover glass or bonding is required, define touch type, controller interface, glass thickness, optical loss, ESD, grounding and final stack thickness in the RFQ.

Procurement Control

For repeat orders, lock exact Innolux model, revision, cable, backlight driver or driver scope, approved drawing, inspection limits and substitute approval rules. Substitutes should be reviewed by engineering before shipment.

Sample Validation

Test image lock, brightness, backlight uniformity, viewing angle, pixel defects, hot/cold start, cable movement, UI readability and mechanical fit in the real enclosure. If used as a service replacement, compare the sample with the original display assembly.

WXGA Replacement Decision

The 15.4 inch 1280×800 format is less common than 15.6 inch FHD, but it remains important for equipment designed around WXGA. Replacing it with FHD can create software scaling and mechanical changes. This product should be considered when the buyer needs to preserve existing UI geometry and wide-temperature behavior.

Built-In LED Converter Scope

The table lists a built-in LED converter and 3.3V LCD power. That can simplify integration, but engineers should still confirm connector, power sequencing, dimming and total power behavior. If the old monitor used a different backlight architecture, the replacement should be validated with the original controller and power supply.

Blank Outline Field

The public table leaves outline dimension blank. Before mechanical approval, request the official drawing or measure a sample. The active area is listed, but active area alone is not enough for bezel design, mounting frame, cable route or service replacement.

When Not to Use This Panel

Do not select this model when the buyer needs 15.6 inch FHD, touch-integrated monitor input or guaranteed sunlight readability. It is a 15.4 inch WXGA panel for systems built around that format. Confirm the outline dimension before committing to a mechanical replacement because the public table leaves that field blank.

Approval Records

Record the official drawing, LVDS cable, built-in LED converter behavior, active-area alignment and measured optical values if the public data is incomplete. This prevents future purchases from relying on a partial web table.

Final Buyer Check

Before volume purchase, confirm the missing outline dimension, approved 30-pin LVDS cable, built-in LED converter behavior and actual brightness through the final front stack. If the buyer is replacing a 15.4 inch WXGA display, verify that the host software and enclosure do not assume a different panel thickness or cable exit.

Quote Scope

For quotation, state whether the buyer needs exact G154I1-LE1 supply or an approved WXGA equivalent. Because outline data is missing on the public page, the RFQ should include mechanical confirmation before price comparison. Controller and cable scope should also be stated clearly.

Final Approval Record

Final approval should also record accepted packaging, screen label photo and whether LCDind is allowed to offer an alternative if exact G154I1-LE1 supply changes.

RFQ Checklist

• Confirm exact model revision, interface mapping, connector, voltage, timing and cable requirement.
• Provide original panel photos, host controller, enclosure drawing, visible window and front-stack requirement.
• Define panel-only, cable, controller-board, touch assembly or complete display-set scope.
• State sample quantity, annual forecast, inspection criteria, packaging and substitute approval process.

Engineering Review Note

The specifications above are taken from the current public product page and should be treated as selection inputs, not final system approval. Before sample purchase or production order, LCDind should review host interface, drawing, optical stack, touch requirement, controller-board scope, operating environment, supply quantity and inspection criteria. This update keeps the existing product URL unchanged while making the page more useful for B2B engineering and sourcing decisions.

Engineering FAQ

Can it replace any same-size panel?

No. Interface, connector, timing, outline and backlight must be checked.

Should touch be assumed?

No. Touch must be confirmed or quoted separately.

What should be supplied for RFQ?

Model/revision, host controller, drawing, cable route, quantity and target application.