11.5 Inch 800×800 High Brightness Square TFT LCD with LVDS Driver Board

11.5 Inch 800×800 Square Flight Simulator TFT LCD with LVDS Driver Board

This 11.5 inch square Flight Simulator  TFT LCD combines an 800 × 800 pixel format, 800 cd/m² listed brightness and a 30-pin LVDS panel interface. The supplier lists a 207 × 207 mm active area, IPS construction, normally black display mode and a -30°C to +80°C operating range. It is offered with a driver board for flight simulator displays and other square-format instrument interfaces.

Confirmed Product Specifications

Square Display Integration

The 800 × 800 active format supports centered gauges, navigation instruments, status graphics and simulator interfaces without forcing a conventional widescreen layout. Mechanical approval should be based on the supplier drawing: the source confirms the active area but does not publish the full outline dimensions, mounting points, connector position or FPC orientation.

Brightness and Optical Review

The listed 800 cd/m² brightness provides more luminance margin than a standard indoor panel. Final readability still depends on cover glass, reflections, optical bonding, dimming, viewing direction and enclosure lighting. Treat sunlight readability as a system-level qualification rather than a claim established by panel brightness alone.

LVDS and Driver Board Scope

The panel is listed with a 30-pin LVDS interface and a driver board. The source does not identify the board input ports, supply voltage, power consumption, firmware, cable set or supported timing. Confirm the complete board kit and host signal requirements before sample approval or PCB release.

Model Identification Note

The live listing shows inconsistent model suffixes: the selection area displays DBC115IEN30L080A-0, while the product parameter table displays DBC115IEN30L080A-01. The related-size table also contains an eDP model that is not evidence for this LVDS configuration. The purchase order, drawing and sample label should therefore lock the exact approved LVDS model before production.

Supply and Customization Review

The listing shows a minimum order quantity of one set. Its general terms state that stock samples may ship within two days and mass production may require three to six weeks, while the FAQ separately says stocked products can ship within three working days. Confirm current inventory, final lead time, warranty terms and packaging with the quotation.

RFQ Checklist

• Required quantity, annual forecast and target delivery schedule.
• Exact approved panel model, revision, drawing and label photo.
• Driver-board input, power supply, cables, firmware and supported timing.
• Cover lens, touch requirement, optical bonding and brightness target.
• Operating environment, dimming, thermal design and validation method.
• Inspection criteria, warranty, packaging and approved-substitute policy.

Engineering FAQ

Is a touch panel included?

No touch panel is listed for this configuration. Treat touch or cover-lens integration as a separate requirement.

Is this confirmed as sunlight readable?

No. The panel is listed at 800 cd/m², but final sunlight readability requires optical and thermal testing in the finished assembly.

Which model number should be ordered?

The live source contains conflicting suffixes. Confirm the exact LVDS model on the drawing and sample label before issuing a production order.