VLARE CORE Controller Board | Universal MSLA 3D Printer Motherboard
VLARE CORE controller board for MSLA resin 3D printer integration, with 120×85×18 mm outline, 12/24V 5–15A input, PWM output and broad LCD/touch support.
Product Attributes
| Brand | LCDind |
|---|---|
| Operating Temp | Standard (0 ℃ to +50/60 ℃) |
| Touchscreen | Optional Touchscreen |
VLARE CORE Controller Board for MSLA Resin 3D Printer Integration
VLARE CORE is a controller motherboard for custom, upgraded and service-replacement MSLA resin 3D printers. The public data lists VLARE CORE model, 120×85×18 mm outline, 60 g weight, 12/24V 5–15A power input through KF2EDGK-5.08 2-pin connection, 1 kHz 5V PWM output through XH2.54 2-pin, USB 2.0, WiFi module support and VlareSlicer workflow using .vlr and .osf formats. It also lists support for resistive touch screens at 3.5 and 4.3 inch, capacitive touch at 4.3, 5 and 7 inch, 2K through 8K monochrome LCD groups across several sizes, and large 4K/6K/7K/8K panel categories. This makes it a controller-selection item, not only a spare electronic board.
For LCDind customers, the main engineering question is whether the board, mono LCD, touch screen, UV light source and mechanical platform form a compatible printer system. MSLA printers are sensitive to exposure timing, LCD resolution, masking area, touch UI, cooling, power stability and firmware/slicer configuration. A motherboard upgrade can fail if the LCD panel, touch screen or UV driver is not matched. The RFQ should describe the printer size, target LCD, current controller, light engine, firmware status and expected slicing workflow.
The supported LCD list is broad, but broad support does not remove the need for model confirmation. A 10.1 inch 8K mono LCD, 8.9 inch 6K panel or 15.6 inch 4K display may require different cable, voltage, timing, mechanical support and optical mask. If a customer is building a custom printer, LCDind should review panel model, exposure area, Z-axis space, UV LED array, cooling and build-plate format. If the customer is repairing or upgrading an existing printer, send the old board label, LCD label, cable photos and touch-screen type.
The 12/24V 5–15A input range and PWM output need system-level electrical review. Confirm power supply capacity, UV LED driver requirements, grounding, fan load, emergency-stop design and enclosure wiring. The board outline is compact, but installation must allow connector access, airflow and safe cable routing. A resin printer environment can expose electronics to heat, UV leakage, resin vapor and service handling, so mounting and protection should be planned before production assembly.
Software workflow is also part of approval. VlareSlicer format support should be checked against the customer’s expected print files, UI language, machine profile, LCD resolution and exposure settings. Do not treat controller hardware as approved until the slicer workflow, touch UI and test print sequence have been verified with the intended LCD and resin process.
RFQ Checklist
- Printer type: new MSLA design, upgrade, repair board or custom large-format platform.
- Target mono LCD size, resolution, panel model, cable and exposure area.
- Touch screen type, size, cable and UI requirement.
- Power supply, UV LED driver, PWM use, fans and wiring plan.
- Mechanical mounting, enclosure, cooling and service access.
- VlareSlicer workflow, file format, machine profile and test-print requirement.
Engineering FAQ
Does broad LCD support mean any mono LCD will work? No. The exact panel, cable, timing, voltage and mechanical setup must be confirmed.
Is this only for replacement repair? It can be used for repair, upgrade or custom printer integration, but each case has different approval steps.
What should be checked before ordering? Check LCD model, touch screen, power system, UV driver, firmware/slicer workflow and enclosure mounting.
Can LCDind quote the LCD together with the controller? LCDind can review a controller-plus-LCD requirement if the printer platform and target resolution are defined.
What is the main integration risk? Assuming board support without confirming LCD cable, exposure area, UV driver and slicer configuration.
Engineering Review Note
Use VLARE CORE when the MSLA printer project needs a controller platform matched to specific monochrome LCD and touch hardware. Send LCDind the printer architecture, LCD target, wiring and software workflow before quotation.
Compatibility Verification and Printer Build Scope
For VLARE CORE, the RFQ should separate controller compatibility from printer performance. A motherboard can support a class of LCDs, but print quality depends on the exact mono LCD, exposure settings, light uniformity, cooling, Z-axis mechanics, slicer profile and resin process. Before ordering, confirm whether the customer needs only the board, a board plus touch display, a controller plus monochrome LCD, or a complete electronics kit for a printer platform.
Prototype validation should include a real print workflow: firmware setup, VlareSlicer profile, file transfer, touch UI, LCD exposure test, UV PWM behavior, fan control and at least one representative print. If the project upgrades an existing printer, compare cable routing, mounting holes, light-engine compatibility and power wiring against the old controller. If the project is a new printer, document the target LCD size and resolution before selecting cables and brackets.
Because this product is a controller board, content and schema should not imply that it is a standalone printer or a guaranteed universal solution. The buyer should define printer architecture and acceptance tests. For a repair project, success may mean the existing printer boots, accepts files, exposes the LCD correctly and prints a known test model. For a new printer project, success may require exposure calibration, UI localization, production wiring and safety review.
Procurement should also define accessory scope. Touch screens, WiFi module, LCD cable, UV driver, power wiring and display panels may or may not be included in a specific quote. If LCDind supplies matching mono LCDs, list each LCD model and resolution in the quotation. If the customer supplies the LCD, LCDind still needs the model and cable details to judge compatibility. This avoids treating “universal” support as a substitute for engineering confirmation.
| Brand | LCDind |
|---|---|
| Operating Temp | Standard (0 ℃ to +50/60 ℃) |
| Touchscreen | Optional Touchscreen |
Q: Do I need to flash different firmware if I change my LCD screen size?
A: Yes. While the VLARE CORE board physically supports screens ranging from 5.5-inch 2K up to 10.1-inch 8K, the motherboard's firmware must be configured to output the exact resolution and timing required by your specific LCD panel. Please let us know which screen you intend to use when placing your order, and we can guide you on the firmware configuration.
Q: What slicing software is compatible with this board?
A: The VLARE CORE motherboard is highly optimized for VlareSlicer. It natively reads and processes .vlr and .osf file formats, ensuring optimal print pathing, anti-aliasing generation, and highly efficient light control algorithms.
Q: Can I use my existing 12V power supply, or do I need 24V?
A: The board features a versatile power delivery circuit that accepts both 12V and 24V DC inputs (5-15A). Your choice of power supply should match the voltage requirements of your connected peripherals, specifically your UV LED array and Z-axis stepper motor.
Q: What do the indicator lights on the board mean?
A: The board includes four status lights for easy diagnostics: D2 (System indicator), D4 (Motherboard fan indicator), D6 (LED fan indicator), and D7 (LED indicator). Note: Always remove the power supply before connecting or disconnecting hardware to avoid shorting the board.
Q: What is the MOQ?
A: The MOQ for our products is 1 piece. We are able to provide support throughout the testing process.
Q: What about the delivery time?
A: We have products in stock and can ship them within 3 working days.
Q: Does your product have any warranty?
A: Yes, we offer a warranty that ensures the LCD will function properly upon receipt. However, please note that we do not provide guarantees for any damage caused during use.
Q: What’s your payment method?
A: We accept several payment methods, including T/T (bank transfer), and PayPal.
Q: What’s your shipping method?
A: Thank you for your inquiry. We offer various shipping methods to suit different needs.
For small quantity orders, we use UPS Air-Express, DHL, FedEx, TNT, or EMS Express service. These options are safe and fast.
For large quantity orders, we typically work with the buyer’s cargo agent in China. Alternatively, we can arrange for air or sea transportation.
Please let us know your preferred shipping method and we will do our best to accommodate your request.
Q: Do you offer custom solution?
A: Yes, we offer custom solutions if our standard products do not meet the buyer’s requirements. Please let us know your specific needs, and we will work with you to create a tailored solution that meets your business needs.
Q: How to Contact us?
A: Send your Inquiry Details in the Below, Click “Send” Now!
