Innolux AT070TN92 7 Inch 800×480 RGB / TTL TFT LCD Panel
Innolux AT070TN92 7 inch 800×480 RGB/TTL TFT panel with 250 cd/m² brightness, 50-pin FPC, 154.08×85.92 mm active area, WLED backlight without driver and -20 to 70 °C operation.
Product Attributes
| Brand | Innolux LCD Panels |
|---|---|
| Size | 7.0 inchSpecify 7 inch industrial TFT LCD modules by resolution, RGB/LVDS/MIPI/eDP interface, brightness, touch, operating temperature, drawing and annual quantity. |
| Resolution | 800×480 |
| Brightness | Standard (200-450 nits) |
| Interface | RGB / TTL |
| Operating Temp | Industrial (-20 ℃ to +70 ℃) |
| Touchscreen | No Touch |
| Viewing Angle | Standard Viewing |
| Panel Type | TN |
Innolux AT070TN92 7 Inch 800×480 RGB TTL Panel
Innolux AT070TN92 7 Inch 800×480 RGB TTL Panel is prepared for B2B industrial display replacement and OEM integration. 7 inch WVGA RGB/TTL panel for standard indoor equipment replacement and controller-based display projects. The public product page should be used as an engineering selection starting point; exact revision, connector, timing, drawing, optical stack and supply scope should be confirmed before ordering.
Confirmed Product Specifications
| Type | TFT |
|---|---|
| Resolution | 800×480, WVGA 134PPI |
| Display Type | TFT |
| Backlight Type | LED Display Screen |
| Mounting Type | Panel Mounting |
| Brightness | 250 cd/m² (Typ.) |
| Display Size | 7 inch |
| Operating Temperature | -20 ~ 70 °C |
| Screen Size | 7.0″ |
| Communication Interface | Parallel RGB (1 ch, 6/8-bit) , 50 pins FPC |
| Active Area | 154.08(W)x85.92(H) mm |
| Outline Size | 164.9(W)x100(H) x 5.7(D) mm |
| Viewing angle | 70/70/50/70 |
| Contrast Ratio | 500:1 |
| Backlight | WLED, 20k hours , without driver |
| Operating Mode | TN, Normally White, Transmissive |
| Response time | 10/15ms |
| Power Consumption | 1.90W (Typ.) |
| Support Color | 262K/16.7M 50% NTSC |
| Selling Units | Single item |
| Single package size | 30X20X10 cm |
| Single gross weight | 0.3 kg |
Application Fit
This panel is useful when the project needs a classic 7 inch 800×480 RGB/TTL display and does not require high brightness or IPS viewing. It can fit legacy HMIs, service panels, automation controllers and repair programs.
Interface and Controller Review
The public table lists parallel RGB 1-channel 6/8-bit with 50-pin FPC. Confirm whether the host uses 6-bit or 8-bit data, connector orientation, backlight driver and cable length before ordering.
Optical and Environmental Boundary
The 250 cd/m² brightness is standard indoor class. If the product is used in bright environments, behind cover glass or as an upgrade from a brighter panel, compare alternatives before approving this model.
Mechanical Replacement Checks
Compare active area, outline, thickness, FPC or connector direction, backlight wiring and mounting pressure with the original equipment. A same-size panel can still fail mechanically if the cable exit or bracket area differs. Replacement buyers should provide old panel label photos and housing information.
Touch or Front-Stack Scope
Unless the public data explicitly includes touch, treat the panel as a bare LCD and quote touch separately. If touch, cover glass or bonding is needed, define touch type, controller interface, ESD, grounding, front-lens thickness and optical loss before sample approval.
Procurement Control
For repeat orders, lock the exact Innolux model, revision, interface cable, backlight driver or driver scope, drawing and inspection criteria. Substitutes should require engineering approval because RGB/TTL/LVDS panels can differ in pinout, brightness, viewing direction and mechanical outline.
Sample Validation
Test the panel with the real host controller, target UI, power supply and enclosure. Check image lock, brightness, backlight uniformity, viewing angle, pixel defects, hot/cold start, cable movement and UI readability. If the display is used for service replacement, compare directly with the original assembly.
Standard 7 Inch Replacement Boundary
This panel is suitable for standard indoor 7 inch WVGA equipment where 250 cd/m² brightness and TN viewing are acceptable. It should not be used as an upgrade target for outdoor or high-viewing-angle applications without comparing brighter IPS alternatives. The buyer should define whether the goal is exact replacement or a performance upgrade.
50-Pin RGB Detail
The public table lists parallel RGB 1-channel 6/8-bit with a 50-pin FPC. Confirm data width, connector, pinout and backlight driver before purchase. Many 7 inch 800×480 panels look interchangeable in catalogs, but the 50-pin mapping and backlight circuit can differ.
Backlight Driver Responsibility
The table lists WLED without driver. If the existing product has a compatible backlight driver, panel-only sourcing may be acceptable. If not, LCDind should quote a driver or controller-board solution. This distinction should be written into the RFQ.
Service Stock Approval
For service inventory, test the sample in the original device, record approved labels and keep comparison photos. If several machine versions use 7 inch screens, validate each version separately because controller and cable changes are common across production years.
When Not to Use This Panel
Do not choose this model when the customer needs wide viewing angle, high-brightness outdoor readability or LVDS/eDP input. It is better positioned as a standard indoor RGB/TTL replacement. If the existing product failed because operators could not read the display outdoors or at an angle, replacing it with the same brightness class will not solve the field issue. Use the RFQ to clarify whether the goal is exact replacement or performance improvement.
Final Buyer Check
Before repeat purchase, confirm whether the project accepts the 250 cd/m² standard brightness or needs a brighter replacement path.
RFQ Checklist
- Confirm exact panel revision, interface mapping, connector, voltage, timing and backlight-driver scope.
- Provide original panel photos, host controller, enclosure drawing, visible window and cable route.
- Define panel-only, touch assembly, controller-board or complete display-set scope.
- State sample quantity, annual forecast, inspection criteria, packaging and substitute approval process.
Engineering Review Note
The specifications above are taken from the current public product page and should be treated as selection inputs, not final system approval. Before sample purchase or production order, LCDind should review host interface, drawing, optical stack, touch requirement, controller-board scope, operating environment, supply quantity and inspection criteria. This update keeps the existing product URL unchanged while making the page more useful for B2B engineering and sourcing decisions.
Engineering FAQ
Can it replace any panel with the same size and resolution?
No. Interface, connector, timing, outline and backlight must be checked.
Should touch be assumed?
No. Touch must be confirmed from the product data or quoted as a separate assembly requirement.
Why provide original photos?
They help confirm label, connector, FPC direction and mechanical fit before ordering.
| Brand | Innolux LCD Panels |
|---|---|
| Size | 7.0 inchSpecify 7 inch industrial TFT LCD modules by resolution, RGB/LVDS/MIPI/eDP interface, brightness, touch, operating temperature, drawing and annual quantity. |
| Resolution | 800×480 |
| Brightness | Standard (200-450 nits) |
| Interface | RGB / TTL |
| Operating Temp | Industrial (-20 ℃ to +70 ℃) |
| Touchscreen | No Touch |
| Viewing Angle | Standard Viewing |
| Panel Type | TN |
What is the resolution of AT070TN92?
The captured supplier evidence states 800x480. Confirm the exact model revision and current datasheet before design-in.
Which host interface does AT070TN92 use?
The captured supplier evidence indicates RGB / TTL. Confirm channel count, bit depth, connector and pin assignment before board design.
Is a touchscreen or controller board included?
The draft treats the selected configuration as the LCD panel only unless the source explicitly states an integrated touch assembly.
What should engineers confirm before ordering AT070TN92?
Confirm the exact model and revision, outline drawing, active area, connector position, pin definition, voltage, timing, mounting points and operating environment against the current datasheet or an approved sample.
What information is needed for a quotation?
Send the exact model or datasheet, required quantity, host interface, mechanical drawing and target application. The captured supplier listing MOQ is 1 piece.
Q: What is the MOQ?
A: The MOQ for our products is 1 piece. We are able to provide support throughout the testing process.
Q: What about the delivery time?
A: We have products in stock and can ship them within 3 working days.
Q: Does your product have any warranty?
A: Yes, we offer a warranty that ensures the LCD will function properly upon receipt. However, please note that we do not provide guarantees for any damage caused during use.
Q: What’s your payment method?
A: We accept several payment methods, including T/T (bank transfer), and PayPal.
Q: What’s your shipping method?
A: Thank you for your inquiry. We offer various shipping methods to suit different needs.
For small quantity orders, we use UPS Air-Express, DHL, FedEx, TNT, or EMS Express service. These options are safe and fast.
For large quantity orders, we typically work with the buyer’s cargo agent in China. Alternatively, we can arrange for air or sea transportation.
Please let us know your preferred shipping method and we will do our best to accommodate your request.
Q: Do you offer custom solution?
A: Yes, we offer custom solutions if our standard products do not meet the buyer’s requirements. Please let us know your specific needs, and we will work with you to create a tailored solution that meets your business needs.
Q: How to Contact us?
A: Send your Inquiry Details in the Below, Click “Send” Now!
