AUO G101EAN02.2 10.1 Inch 1280×800 LVDS TFT LCD Panel

AUO G101EAN02.2 10.1 Inch 1280×800 LVDS IPS Panel for Industrial Integration

AUO G101EAN02.2 is a 10.1 inch industrial TFT LCD panel for replacement and OEM display integration. The public page confirms 1280×800 WXGA resolution at 149 PPI, AHVA/IPS normally black transmissive mode, 500 cd/m² typical brightness, 800:1 contrast ratio, 89/89/89/89 typical viewing angle, 40-pin 1-channel 8-bit LVDS interface, 216.96×135.6 mm active area, 227.91×148×5.43 mm outline dimension, -20 to 70 °C operating temperature, WLED backlight with LED driver, 50k-hour backlight, 29 ms response time, 16.7M colors, 45% NTSC, 4.024W maximum consumption and 0.643 kg weight.

Confirmed Product Specifications

Industrial 10.1 Inch Use Case

This panel is appropriate for industrial HMIs, medical equipment interfaces, test instruments, portable terminals, automation panels and compact control systems that need a 10.1 inch WXGA display with wide viewing and moderate high brightness. The 1280×800 format gives more vertical space than 1024×600 panels, which helps engineering screens that show trend graphs, status groups, menus and numeric values.

LVDS Integration Requirements

The confirmed interface is 1-channel 8-bit LVDS with a 40-pin connector. The buyer should provide the host controller specification, LVDS mapping, cable length, connector direction and power sequencing requirement. If the existing product uses eDP, HDMI, MIPI or another LVDS mapping, a direct swap cannot be assumed. For new OEM projects, controller-board selection should be done before mechanical tooling is fixed.

Optical and Viewing Considerations

The 500 cd/m² typical brightness and AHVA viewing angle support industrial indoor use, bright factory environments and protected equipment panels. It is not automatically a sunlight-readable outdoor display. If the display sits behind cover glass, a resistive touch panel or a thick front lens, the optical stack can reduce readability. LCDind should review whether bonding, anti-glare treatment or higher brightness is needed for the actual installation.

Mechanical Fit and Replacement Risk

Replacement projects should compare the 227.91×148×5.43 mm outline, active area, connector location, mounting method and cable exit with the original product. A 10.1 inch label is not enough because many panels share the same diagonal but differ in bracket area, FPC direction, thickness and connector position. When the buyer is replacing a failed panel, original label photos and drawings are important RFQ evidence.

Thermal and Power Review

The panel lists -20 to 70 °C operating range and 4.024W maximum consumption. Engineers should check heat rise in the enclosure, backlight current, dimming range and power budget. In sealed equipment, display heat can affect touch performance, adhesive selection and controller reliability. Thermal testing with the final cover and enclosure is more useful than checking the panel on an open bench.

Supply and Revision Control

AUO industrial panels can have revision changes over time. Procurement should ask whether the quotation is for exact G101EAN02.2 supply, compatible replacement or a custom LCDind assembly based on this panel. For production orders, lock revision, connector, test criteria, packaging and substitute approval rules so future deliveries do not create hidden mechanical or electrical changes.

Acceptance Testing

A practical acceptance plan includes power-on behavior, LVDS image stability, brightness and color check, viewing-angle confirmation, pixel inspection, hot/cold start, backlight dimming and UI readability. If the display is part of a regulated or safety-related device, LCDind should support the buyer with traceable drawings and revision records rather than only catalog specifications.

When to Use G101EAN02.2 in New Designs

For a new OEM design, this panel is a good candidate when the UI needs a compact 10.1 inch wide-format screen with industrial temperature range and LVDS input. It is especially relevant when the product must show more vertical information than a 1024×600 display but cannot accept a larger 12.1 or 15.6 inch module. The buyer should decide early whether touch, cover glass or optical bonding will be part of the final assembly because those choices affect mechanical thickness and brightness.

Replacement Procurement Notes

For replacement sourcing, do not order based only on 10.1 inch and 1280×800. Provide the old panel label, connector photo, rear mechanical photo and host controller information. If the old panel is not G101EAN02.2, LCDind should compare active area, connector pinout, backlight, outline and timing before suggesting this model. A controlled comparison prevents unnecessary sample freight and avoids late discovery of mechanical mismatch.

RFQ Checklist

• Confirm exact AUO G101EAN02.2 revision, LVDS mapping, connector, cable length and panel voltage.
• Provide host controller, enclosure drawing, active-area window, touch or cover-glass requirement and operating environment.
• State whether the project is replacement, new OEM design, sample evaluation or controlled production purchase.
• Define quantity, annual forecast, packaging, inspection criteria and substitute approval rules.

Engineering Review Note

The specifications above are taken from the current public product page and should be treated as selection inputs, not final system approval. Before sample purchase or production order, LCDind should review host interface, drawing, optical stack, touch requirement, controller-board scope, operating environment, supply quantity and inspection criteria. This update keeps the existing product URL unchanged while making the page more useful for B2B engineering and sourcing decisions.

Engineering FAQ

Is this a touch panel?

No. The public attributes list no touch.

What makes it suitable for industrial use?

The page lists -20 to 70 °C operation, LVDS interface, 500 cd/m² brightness and wide viewing.

Can it replace any 10.1 inch 1280×800 panel?

No. Connector, timing, outline and revision must be checked.