DBM101LCDM14K01 Product Datasheet

DBM101LCDM14K01 is a 10.1-inch monochrome transmissive TFT LCD with a 13320 × 5120 pixel matrix. The V00 specification defines the mechanical outline, 51-pin interface, dual-channel 8-lane MIPI signal arrangement, power requirements, interface timing, optical characteristics, reliability tests and handling precautions for engineering evaluation.

Key Panel Specifications

• Model: DBM101LCDM14K01
• Document revision: V00
• Display size: 10.1 inch
• Resolution: 13320 × 5120 pixels
• LCD type: Monochrome TFT, transmissive
• Outline dimensions: 230 × 142 × 1.06 mm
• Viewing area: 223.78 × 126.98 mm
• Pixel size: 0.0168 × 0.0248 mm
• Interface: 8-lane MIPI
• Connector: 51-pin
• Operating temperature: -20°C to 70°C
• Storage temperature: -30°C to 80°C

Electrical and Interface Notes

The interface uses separate master and slave MIPI DSI signal groups, each providing four data lanes and one clock pair. The document specifies a typical IOVCC of 1.8 V together with +5.5 V AVDD and -5.5 V AVEE supplies. The listed maximum current consumption is 150 mA.

Electrical compatibility must be verified against the target controller board. A matching 10.1-inch size or 13320 × 5120 resolution does not confirm compatibility unless the connector, pin assignment, MIPI timing, reset sequence, FPC routing and power rails also match.

Optical and Reliability Information

The specification lists a typical response time of 25 ms and wide viewing characteristics. The 405 nm transmittance and contrast-ratio values are marked as TBD in revision V00 and should therefore be confirmed for projects where UV exposure performance is a controlled requirement.

The documented reliability program includes high- and low-temperature operation, temperature storage, high-temperature and high-humidity storage, thermal shock, ESD, vibration and packaged drop testing. Refer to the complete PDF for the applicable test conditions and acceptance notes.

Compatibility Notice

The associated product is presented for Anycubic M5s Pro replacement evaluation, but the panel specification itself does not establish universal printer compatibility. Before ordering, compare the original LCD label, complete model suffix, outline drawing, FPC position, connector, pinout, MIPI timing, polarizer orientation, controller board and printer firmware.

Frequently Asked Questions

Is DBM101LCDM14K01 guaranteed to work in every Anycubic M5s Pro printer?

No universal compatibility guarantee can be made from the printer name alone. Confirm the original screen model, connector, FPC, pinout, timing, mechanical outline and controller compatibility before purchasing.

What is included in the complete datasheet?

The complete V00 document includes mechanical dimensions, the 51-pin interface definition, MIPI timing information, electrical ratings, optical specifications, reliability test conditions, inspection requirements and handling precautions.

What should be confirmed before requesting a sample?

Provide the printer model, original LCD label and photos, controller-board information, connector and FPC details, mechanical requirements and expected sample or production quantity.

Are the 405 nm optical values finalized?

No. In the supplied V00 specification, 405 nm transmittance and contrast-ratio values are marked as TBD. Projects with controlled UV exposure requirements should request confirmed optical data before final design approval.

Can the public preview PDF be used for engineering approval?

No. The preview is intended for initial model identification. Engineering approval should use the complete datasheet, confirmed project specification and validated samples.